Are you looking for information
on how to install external cameras because you decided to install them for your
safety? Here is an illuminating article for you that will make you understand
where to start, starting from the choice up to the delivery of the finished
work.
Through this short article you
will understand how important it is to turn to expert and qualified personnel.
In addition, we will show you how to find the contact of the best companies
that we have the experience necessary to perform work such as installing
external cameras.
How to install external cameras: indicative project evaluation?
1. Preliminary phase: preparation for the installation of the external cameras
The decision to install one or
more external video surveillance cameras
can be dictated by many factors such as the fear of thieves who can enter the
house and steal valuables, or the lack of trust in neighbors or those who live
in your vicinity that you believe has need to be checked. The first thing to
check, together with expert staff, is that the area you want to keep under
control does not include public passages but only and exclusively private ones.
If not, you will need to request different privacy permissions.
After identifying the area to be
monitored and checking the total absence of public passageways, it is necessary
to trace this area well by drawing a map, in order to get an idea of the type
of system most suitable for the place and the number of cameras to be to
install. Once these important checks have been carried out, you will have to
choose the type of camera to be installed between analog and IP cameras: the
main difference between these two types of cameras can be summarized in the
cable system that you need to connect them to the system. Analog cameras need
to have two cables (one for power and the other for video signal) while for IP
cameras there are different cable systems.
A characteristic of the external
cameras that differentiates them from the internal ones and that makes them
raise the price, is that of resisting rain, hail and all weather agents. It
should never be forgotten that a sign must be placed at the beginning of the
area to indicate the presence of video surveillance cameras in Chicago.
Another important choice in the
preparatory phase before installation is the choice of a device for recording.
These devices are essentially of two types: DVR for analog systems and NVR for
IP cameras. Some types of cameras may require a micro SD depending on the
memory.
The support of an expert will
guide you in choosing the camera that best suits your needs and the context in
which you live and will also help you carry out the bureaucratic part related
to the installation procedures of external cameras.
2. Executive phase: installation of the video surveillance system
Once all the necessary and
important initial procedures have been carried out to verify that there are
conditions to be able to install the cameras in your home, you can continue
with the installation of the system.
The first phase is that of the
"wiring", that is to say the arrangement of all the cables that will
be used for switching on the devices and for correct operation of the system
itself. In this first phase it is of fundamental importance to arrange the
cables in an orderly way, holding them if possible with clamps and to number
them in such a way as to be able to recognize them in case of short circuits or
other faults. The wires must be inserted in different channels according to
their function.
The second phase, which is also
the most important, is that of assembling the cameras, an operation that
requires a lot of manual skill and familiarity with this kind of object. It
will therefore be appropriate for this phase to make sure that you are
entrusted to the most right and competent professional for this type of work.
The recommended height for a
normal external camera is 4 meters above the ground, since positioning your
device at an excessive height could compromise a clear and sharp vision of some
details recorded through the lens in case the camera was excessively tilted at
the time of shooting.
Placing your device in a position
too low, on the other hand, will expose the system to risks of tampering by
attackers since placing a camera at very easy to reach heights exposes this
device to being damaged.
Another aspect to which you must
pay particular attention is to not place the camera in front of very strong and
direct lights or in places where there are reflections due to nearby lights,
since they could compromise or even render the recordings completely unusable.
Although there are adhesives
created to fix your devices to a wall or wall, you will preferably have to use
screws, much safer and more effective, but above all more resistant to external
agents and tampering.
3. Final phase: fixing the cameras
To fix your camera to the wall
you will need to carefully follow the following steps:
- place the camera base in the location identified
- mark on the wall or on the wall with a pencil the points where you will later insert the screws
- drill the wall in the points previously identified with a drill
- mount the plate on which to place your camera
- fix the camera on the plate being careful to position it in the right direction
After following these steps
meticulously, you can proceed to the final phase that is to connect the power
and network cables in the appropriate sockets and then start the system.
Fixing a camera is not in itself
a particularly complicated job but requires some experience and does not adapt
to DIY. When positioning the camera, it will be necessary to carefully choose
the direction and have many other precautions that only an expert eye can cure.
It is not complicated to use a drill or to put cables together but the
procedures must follow the regulations and a specific procedure, so relying on
specialized companies is the best solution.
Do you think it is complicated to carry out work such as installing external cameras? Evaluate all aspects
With this article we believe that
we have clarified your ideas on this topic regarding works such as installing
external cameras.
Now that you have more knowledge
than before, you will surely also have understood that the choice of the type
of Security cameras, the positioning
and all the necessary checks before installing these devices are topics of
expertise of an expert.
Find the company tailored for you on Getstealth
Performing a job such as
installing external cameras is important when you want to live in a safe and
secure environment. Deciding to deal with this type of work involves having to
turn to competent personnel, capable of carrying out the work correctly.
With Getstealth you enter a world
made up of professional companies highly specialized in jobs such as installing
external cameras. Connect to our platform and find the best companies for you.
You can send them a request for free, indicating all your needs and the details
of the work you intend to perform. In a short time you will be contacted by
professionals with whom to agree on details and methods of work.
With Getstealth you find the
right people for you, and a system at your disposal that is easy, fast and
reliable
Related Post: Differences
between AHD system and IP camera
Related Post: CCTV
& access control
Related Post: Video
surveillance cameras and Privacy security system
Related Post: The
importance of a video surveillance system for your business
